Space Air - always providing the right heating and air conditioning solution
Published by Jennifer Stanbridge for Space Air Solutions in Housing
Monobloc with Consumer Unit
Space Air has worked with Daikin for over 32 years, giving us the knowledge and expertise to create the ideal system for every application. We give quality services and support to all our customers!
Space Air Monobloc Project -
A 3-bedroom semi detached 96sqm property where the inefficient and bulky storage heaters were to be replaced by an air to water heat pump system.
Space Air advised on the low temperature (up to 50°C without back up heater) single phase Daikin Altherma Monobloc air to water heat pump. This then connected to slim line radiators throughout and a 200L DHW storage cylinder with a back-up 3kW immersion heater. This system gave the occupants the much-needed extra space inside their home.
To fully optimise the Daikin system Space Air provided bespoke accessories these included; prefabricated purpose made piping kit, to reduce on-site installation time and costs, wall brackets and a protective mesh enclosure for the outdoor unit. A condensate tray to drain off surface water to prevent build-up of ice during the winter months was also supplied. Finally, as with all Space Air supplied Daikin Altherma systems, a watt meter to continually monitor the heat pump energy use.
Due to Space Air’s prefabricated piping kit the installation caused minimal disruption and ensured sufficient space was left around the unit for the annual servicing and maintenance. The occupants are now expected to save at least 30% in operating costs compared to their old inefficient heating system making this project a huge success!
Comment from Wealden District Council - ‘The tenants were more than eager to have the air source heat pump installed and, although early days, are very happy with it. As a result of our trials, we are now embarking on a complete roll out of this technology (Space Air Daikin Altherma) to our off gas properties.’
Space Air designs and manufactures in-house bespoke accessories - providing the right solution for your project!
Space Air has the facilities and creativity in-house to design and manufacture accessories for your units while delivering quality service and reliability. These include;
Prefabricated Piping Kits - All Space Air Daikin Altherma Heat Pumps come complete with a prefabricated piping kit to ensure a fully optimised and protected system.
Consumer unit with built in Watt Meter - Every Space Air Daikin Altherma supplied heat pump comes with a dedicated consumer unit with built in watt meter to continually monitor the system energy use.
Wall Brackets - Depending on the location of the unit, wall brackets are sometimes necessary to mount the unit against the wall ensuring that the unit is stable.
Condensate Trays - To drain off surface water to prevent build-up of ice during the winter months.
For more information please contact us on 01483 252 252. Alternatively you can visit our website www.spacealtherma.co.uk.
READ NEXT »